Instruction Manual
LIUDPP002_eng-00AUTEC
51
Start up the Transmitting Unit only to use it according to its intended use or
for operational needs (by way of example: maintenance, checks): improper
use may cause dangerous situations.
Never art up or use the Transmitting Unit in closed spaces, with no or poor
visibility, or outside the Radio Remote Control working range: in such cases
it is ill possible to eablish a radio link between the Transmitting Unit and
the Receiving Unit, thus causing the risk that unwanted commands be carried
out by the radio remote controlled Machine.
Get familiar with the relation between the actuators and the Machine's
movements (this is indicated in the attached Technical Data Sheet) and learn
symbols on the Transmitting Unit's panel (the used symbols are defined by
the Machine Manufacturer and/or by the Inaller depending on the effectiveness
and the functions the Machine requires).
8.2.2 During normal operation
Pay attention to the entire work area. Immediately press the GSS or EMS
pushbutton when a hazardous situation occurs.
Visually and directly follow all movements of the Machine and its load and
remain inside the Radio Remote Control working range.
Pay particular attention to warnings and visual and acouic signals, and take
all measurements and eps to avoid that movements of the remote controlled
Machine may lead to hazardous situations for people and/or property.
In case of malfunction, switch off the Transmitting Unit and disconnect power
supply from the Receiving Unit: this way, the syem "Machine+Radio Remote
Control" is disabled; it mu not be used until the problem has been solved
by implementing the necessary technical operations.