Instruction Manual
LIUDPP002_eng-00AUTEC
47
The Machine Manufacturer and/or the Inaller mu assess and adopt possible
additional protection measures for the actuators (by way of example:
commands requiring two-hand operation, “dead-man” function) if particular
environments, equipment and working modes could generate risk situations,
and if Laws, Regulations and Standards in force in the country where the
Radio Remote Control and the Machine are used should require it.
7.4 Activation and/or deactivation of commands due to failure
It is possible that a command be activated or deactivated due to electrical
and/or mechanical failure, that may affect the Radio Remote Control and/or
the Machine.
The Machine Manufacturer and/or the Inaller of the Radio Remote Control
mu carefully evaluate the possible consequences of such malfunction. If
required by the risk assessment, implement protection measures to prevent,
reduce and report potential hazardous situations.
For further information see paragraph 4.4.
If a command is activated and/or deactivated due to failure, carry out the following procedure:
1. Press the GSS or EMS pushbutton to bring the Machine to a safe ate.
2. Disable the Radio Remote Control and op using the syem "Machine+Radio Remote
Control" until the problem has been solved by implementing the necessary technical
operations.
7.5 Latching functions
Latching functions possibly available on the Radio Remote Control cannot
be used for Machine's hazardous functions because they are never safety
functions.
These latching functions are available on the Radio Remote Control only upon
reque by the Machine Manufacturer and/or Inaller, who has/have the
responsibility to check if they are appropriate for a safe use of the Machine.