Instruction Manual

LIUDPP002_eng-00AUTEC
43
Since the "Take & Release" Radio Remote Control consi󰄋s of two Transmitting
Units an one Receiving Unit, the In󰄋aller mu󰄋 carefully assess the risks
generated by the presence of multiple Units, and adopt the necessary risk
reduction measures.
6.4.5 At the end of in󰄋allation
Make sure that during in󰄋allation the protection measures on the Radio
Remote Control and/or in the Machine have not been made ineffective by
improper in󰄋allation works.
Look up in the Technical Data Sheet and check that the frequency band set
in the Radio Remote Control is permitted in the country of use.
Correctly close the Receiving Unit in order to maintain the protection from
du󰄋, contaminants and water:
- Make sure that the gasket is intact and correctly seated.
- Check that the housing parts correctly 󰄈t so that they overlap.
- Tighten the screws.