Instruction Manual

LIUDPP002_eng-00 AUTEC
26
4.3.2 EMergency Stop (EMS) function
The EMS function is never available in "Take&Release" Radio Remote Controls.
The User activates EMS function by using the red pushbutton on a yellow background identified
with EMS in the Transmitting Unit.
This manual 󰘵op fir󰘵 generates an active 󰘵op and then it switches off the Transmitting Unit.
This working logic implicates that the Receiving Unit brings the Machine to a safe 󰘵ate when
it receives the command generated by the active 󰘵op. If this does not happen due to interference
causing incorrect or broken radio link, the passive 󰘵op will activate the automatic 󰘵op function
in the Receiving Unit.
The red pushbutton in use complies with the IEC 60204-1 and with the IEC 60947-5-5.
The EMS function complies with the ISO 13850.
Activation of EMS pushbutton
Active 󰄋op
Switching o󰓐 the
Transmitting Unit
Passive 󰄋op
Deactivating the Receiving Unit's
STOP outputs
The EMS function is available if and only if the Radio Remote Control is 󰘵arted (see
paragraph "Radio Remote Control 󰘵art up" in "Part C" of the Manual).