Instruction Manual

LIUDPP002_eng-00 AUTEC
22
4.2 Control devices
4.2.1 Start up and switch o󰓐
Start up and switch o󰘯 functions are described in chapter "General instructions for operation"
included in "Part C" of the Instruction Manual. Therefore, please refer to that part of the Manual.
4.3 Radio Remote Control 󰄋op functions
The Radio Remote Control has two 󰘵op functions that bring the Machine to a safe 󰘵ate every
time it is necessary to 󰘵op it due to a potentially hazardous situation:
- Automatic 󰘵op function (ATS): this function is activated automatically (see chapter 4.3.3).
- Manual 󰘵op function: this 󰘵op function may be a General Safe Stop (GSS, see paragraph
4.3.1) or an EMergency Stop (EMS, see paragraph 4.3.2).
The automatic 󰘵op function (ATS) and the manual 󰘵op function are both safety functions (see
paragraph 4.5).
The GSS function and the EMS function are never present simultaneously in
a Radio Remote Control. The Machine Manufacturer and/or the In󰄋aller have
the responsibility to decide which one is the correct/suitable one for the radio
remote controlled Machine in accordance with the requirements for such
function.
THE USER MUST AT ALL TIMES PAY FULL ATTENTION TO THE SAFE AND
PROPER OPERATION OF THE MACHINE IN ACCORDANCE WITH THE
INSTRUCTIONS AND WARNINGS PROVIDED IN THIS MANUAL AND WITH
THE MANUAL, INSTRUCTIONS AND WARNINGS FOR THE MACHINE AND
WITH ALL APPLICABLE LAWS, REGULATIONS AND STANDARDS, EVEN
LOCAL.
ACTIVATING THE PUSHBUTTON RELATED TO THE STOP FUNCTION (GSS
or EMS) MAY NOT RESULT IN AN IMMEDIATE STOP OF THE MACHINE.