Instruction Manual

LIUDPP002_eng-00AUTEC
21
WARNING: The operating working range may be significantly and unpredictably
reduced compared to the value indicated in the technical data (see paragraph
4.5) when special conditions occur in the working environment (by way of
example: temporary presence of electromagnetic interference and/or metal
ob󰄋ructions).
WARNING: The operating working range may be extended up to ten times
compared to the value indicated in the technical data (see paragraph 4.5) when
there are no interference elements in the working environment (by way of
example: no electromagnetic interference and/or metal ob󰄋acles).
When a radio link is interrupted:
- All outputs of the Receiving Unit are disabled
- It is not possible to enable or disable the Machine commands through the Transmitting Unit
until the Radio Remote Control is 󰘵arted up again.
When the START pushbutton is pressed to re-󰄋art the Radio Remote Control,
the commands that are not monitored during 󰄋art up (see Technical Data
Sheet), if active, immediately activate the Machine functions that are associated
with them.
The Machine's Manufacturer or those who integrate the Radio Remote Control
in the Machine mu󰄋 take this Radio Remote Control behaviour into account
when carrying out the risk assessment. The Machine Manufacturer or those
who integrate the Radio Remote Control on the Machine mu󰄋 inform the User
if they believe that the reactivation of such Machine functions may entail
hazardous situations that cannot be reduced by reasonable technical measures
implemented on the Machine itself.