Instruction Manual

LIUPJQ000_eng-00AUTEC
35
9 In󰄋ructions for the User
The chapter "Instructions for the User" in "Part A" of the Instruction Manual contains the
warnings for the use that add to those provided in this chapter. Therefore, please refer to
that part of the Manual.
The following in󰘵ructions are general, they refer to general usage situations for the Transmitting
Unit, and indicate how people should or should not behave when using the unit: these do not
cover any possible risk situation and/or drawback that may depend on specific applications of
Autec Radio Remote Controls.
However, in󰘵ructions given in the following paragraphs do not replace nor complete the
in󰘵ructions that mu󰘵 be provided to the User by the Manufacturer of the Machine where an
Autec Radio Remote Control (to which the PJQ Transmitting Unit belongs) is in󰘵alled.
9.1 Usage re󰄋rictions
If the Radio Remote Control User wears electronic devices (by way of example:
pacemaker, implantable cardiac defibrillator, hearing aids), the Transmitting
Unit mu󰄋 be kept at lea󰄋 15 cm away from those devices when in use.
Do not expose the Transmitting Unit to 󰄋rong magnetic fields, as they may
affect the correct operation of the Unit (its immunity level is provided in chapter
4).
9.2 User behaviour
Besides the in󰘵ructions contained in the General Part (Part A) of the In󰘵ruction Manual, when
using the Transmitting Unit, the User mu󰘵:
- Observe and comply with all in󰘵ructions and warnings provided by the Machine Manufacturer.
- Observe and comply with all in󰘵ructions and warnings provided by the In󰘵aller.
- Observe and comply with all in󰘵ructions and warnings provided by the Person responsible for
the Machine commissioning or making the Machine available for work.
- Observe and comply with all in󰘵ructions and warnings provided in the Radio Remote Control
Manual.
- Observe and comply with all applicable Laws, Regulations and Standards, even local.
- Follow and put into practice the working in󰘵ructions he received, and/or those he mu󰘵 be
aware of because of his work and his tasks.
- Avoid using the Radio Remote Control if he has not been properly trained and prepared, and if
he has not been quali󰘰ed for its use by the Person responsible for the work.
- Make sure that the Transmitting Unit and the Receiving Unit are whole and work perfectly.
- Make sure that the Machine reacts correctly to the commands activated by the Autec Radio
Remote Control.
- Not perform any operation if the te󰘵s mentioned in the previous two points did not give positive
results.