Instruction Manual
LIUPJQ000_eng-00 AUTEC
26
8.7 Battery
The Dynamic+P series' Transmitting Units can only be powered by Autec
rechargeable batteries.
For any warnings and inó°„‹ructions regarding the battery, see "Part E" in the
Inó°„‹ruction Manual.
8.7.1 Battery insertion
To insert the battery, proceed as follows:
1. Push the battery towards the contacts on the Transmitting Unit (1).
2. Insert the battery in its housing (2).
The battery slides easily into place and ensures that the positive (+) and negative
(-) poles are correctly connected only if it is inserted with the plate facing its housing,
so that the battery's contacts match the Transmitting Unit's contacts.
8.7.2 Battery removal
To remove the battery, proceed as follows:
1. Push the battery towards the contacts on the Transmitting Unit (3).
2. Remove the battery from its housing (4).
When the Transmitting Unit is not in use, remove the battery if possible.