Instruction Manual

LIUPJQ001_eng-00AUTEC
31
- Make sure that the Transmitting Unit and the Receiving Unit are whole and work perfectly.
- Make sure that the Machine reacts correctly to the commands activated by the Autec Radio
Remote Control.
- Not perform any operation if the te󰘵s mentioned in the previous two points did not give positive
results.
- Make sure that the Radio Remote Control operation and the consequent Machine movement
occur in safety conditions, to prevent hazards to people and/or property.
- Adopt the necessary caution to avoid that the Machine operation causes dangerous situations
of any type; to this end, the User's physical and health 󰘵atus shall be taken into account too.
- Avoid leaving the Transmitting Unit unattended or in such a condition that it may be damaged,
tampered with, operated by people who are not quali󰘰ed or by the movement of people and/or
objects (by way of example due to: fall, movement, contact).
- Operate the Transmitting Unit by holding it correctly in his hands, so that he can activate the
Machine movements correctly and in safe conditions and monitor its light signals.
- Keep at a safe di󰘵ance from any risk situations originating from the use of the Machine where
the Autec Radio Remote Control is in󰘵alled.
- Avoid doing anything else while using the Radio Remote Control, such as, by way of example,
operate other Machines and/or other devices, eat and/or drink, use communication devices
(phone, radio phone, etc.), keyboards, computers, IT devices or AV equipment, or carry out
any other action that may pose the User in the situation not to be able to correctly control the
Transmitting Unit and/or the Machine.
- activate immediately, and anyway in safe conditions, the 󰘵op devices available on the
Transmitting Unit and/or on the Machine, in case dangerous situations occur, even if they do
not depend on the use of the Machine.
- Use the Transmitting Unit in such a way as to avoid contact with objects and/or People, fall and
loss of control.
- Use the transmitting unit with supports such as belts and the like, which are provided with the
Radio Remote Control.
- Not modify or tamper with the Transmitting Unit, its components and/or its commands; not
modify the indications and/or meaning and/or abbreviations and/or symbols and/or original
󰘵ickers on the Transmitting Unit's panel.