Instruction Manual

LIUPJQ001_eng-00 AUTEC

This function is e󰘵ablished by the Machine Manufacturer (see Technical Data Sheet).

8.7 Battery

The Dynamic+P series' Transmitting Units can only be powered by Autec

rechargeable batteries.

For any warnings and in󰄋ructions regarding the battery, see "Part E" in the

In󰄋ruction Manual.

8.7.1 Battery insertion

To insert the battery, proceed as follows:

1. Push the battery towards the contacts of the Transmitting Unit.

2. Insert the battery in its housing.

The battery slides easily into place and ensures that the positive (+) and negative

(-) poles are correctly connected only if it is inserted with the plate facing its housing,

so that the battery's contacts match the Transmitting Unit's contacts.

8.7.2 Battery removal

To remove the battery, proceed as follows:

1. Push the battery towards the contacts of the Transmitting Unit.

2. Remove the battery from its housing.

When the Transmitting Unit is not in use, remove the battery if possible.