Instruction Manual

LIUPJQ001_eng-00AUTEC
17
Removing the mechanical key
Do the following to remove the mechanical key:
1. Turn the mechanical key anticlockwise.
2. Pull the mechanical key to remove it from its receptacle.
8.1.2 M-Key
The M-Key makes it possible power the Transmitting Unit.
Inserting the M-Key
Push the M-Key to the bottom of its housing.
Removing the M-Key
Remove the M-Key from its housing by pulling the lanyard.
8.2 START pushbutton
The START pushbutton is used to:
- 󰘵art the Radio Remote Control (see paragraph 8.8)
- activate the horn when the Radio Remote Control is 󰘵arted.
8.3 STOP pushbutton
When the STOP pushbutton is activated, the Machine 󰘵ops and the
Transmitting Unit switches off. To 󰘵art the Radio Remote Control again
and enable it to control the Machine after the STOP pushbutton has
been pressed, you need to:
- Make sure that the working and usage conditions are safe.
- Pull or turn the STOP pushbutton in the arrow direction (shown on
the button) to unlock it.
- Start the Radio Remote Control following the procedure described in
paragraph 8.8).