Instruction Manual

3 Conformity
Addressees of instructions must:
- make sure that the Radio Remote Control works within the frequency band permitted in
the country where it is used;
- make sure that the Radio Remote Control works correctly, in compliance with the applicable
standards in the relevant country;
- not modify the Radio Remote Control conformity, by performing modi󰘰cations or technical
operations that change its operation.
During training on or usage of Autec Radio Remote Controls, local provisions imposing the
conservation of product conformity with local standards must be respected, as well as speci󰘰c
standards related to safety in the use of Radio Remote Controls or electrical devices, both
in the working environment or outside of it.
3.1 FCC/IC conformity
An Dynamic series' Radio Remote Control working in the frequency band 915-928MHz
complies with the requirements of the following standards:
- FCC (Federal Communication Commission) Part 15,
- IC (Industry Canada) RSS-247.
The following table lists the approval identi󰘰cation codes for each type of Transmitting Unit
and for each type of Receiving Unit in the Dynamic series.
Unit FCC ID IC number
ADD Receiving Unit
Model ADD Type NE022
OQA-ADDNE022
d
9061A-ADDNE022
a b c
ARM Receiving Unit
Model ARM Type NB022
OQA-ARMNB022
d
OQA-ARMNC022
d
9061A-ARMNB022
a b c
9061A-ARMNC022
a b c
ARS Receiving Unit
Model ARS Type ND022
OQA-ARSND022
d
9061A-ARSND022
a b c
ARX Receiving Unit
Model ARX Type NG022
OQA-ARXNG022
d
9061A-ARXNG022
a b c
CRS Receiving Unit
Model CRS Type NA022
OQA-CRSNA022
d
9061A-CRSNA022
a b c
CRX Receiving Unit
Model CRX Type NH022
OQA-CRXNH022
d
9061A-CRXNH022
a b c
FJB Transmitting Unit
Model FJB Type NZ422
OQA-FJBNZ422 9061A-FJBNZ422
FJC Transmitting Unit
Model J2F Type NZ322
OQA-J2FNZ322 9061A-J2FNZ322
12
LIUDY2003_eng-00
Conformity
AUTEC - Dynamic Series