Instruction Manual
4 Technical data
Power supply (battery MBM06MH) ......................................................................... 7.2V
Power supply (battery LPM02) ............................................................................... 7.4V
Antenna .................................................................................................................. internal
Housing material .......................................................................................... PA 6 (20%fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions .................................................................. 260x177x161mm (10.2x6.9x6.3In)
Weight ........................................................................................................... 1.8kg (3.9Lb)
Run time at 20°C (68°F):
- with battery MBM06MH ............................................................................................... 11h
- with battery LPM02 .................................................................................................. 18.5h
- with LPM02 battery and 2.8" colour display ................................................................... 9h
5 Technical Data Sheet
The Radio Remote Control 's Technical Data Sheet:
- describes the Transmitting Unit's conguration,
- indicates the relation between commands sent by the Transmitting Unit and those available
on the Receiving Unit.
The Technical Data Sheet must be lled in, checked and signed by the Installer, who is
responsible for correct wiring.
A Technical Data Sheet must always be kept together with this Manual: if you need to use
the Technical Data Sheet for administrative purposes (tests, check, etc.), make a copy of it.
The wiring of the Receiving Unit's outputs must always reect the wiring
indicated in the Technical Data Sheet.
AUTEC - Dynamic Series
Technical data 13
LIUFJC000_eng-00