Instruction Manual

LIUFJQ001_eng-00 AUTEC
IT IS THE RESPONSIBILITY OF THE OWNER AND FACILITY OPERATOR, AND THEIR
DESIGN PROFESSIONALS, that the in󰄋allation, maintenance and operation of the Autec
Radio Remote Control and all of its components are done solely and completely in
accordance with this Manual, and with all applicable Laws, Regulations and Standards,
even local. It is also the responsibility of the Manufacturer of the Machine on which the
Autec Radio Remote Control is to be in󰄋alled and used, and their design professionals,
to be certain that the 󰄋ructure, condition, organization and markings of the Machine as
in󰄋alled at the facility is appropriate for and will allow for the safe and reliable use and
control of the Machine through the Autec Radio Remote Control interface.
ONLY QUALIFIED AND PROPERLY TRAINED PERSONNEL SHOULD BE PERMITTED TO
OPERATE OR USE THE AUTEC RADIO REMOTE CONTROL AND THE MACHINE OPERATED
BY OR THROUGH THE AUTEC RADIO REMOTE CONTROL. ONLY QUALIFIED AND
PROPERLY TRAINED PERSONNEL SHOULD BE PERMITTED TO BE IN THE VICINITY OF
MACHINE OPERATED BY OR THROUGH THE AUTEC RADIO REMOTE CONTROL.
FAILURE TO PROPERLY INSTALL, OPERATE, MAINTAIN AND SERVICE THE AUTEC
RADIO REMOTE CONTROL CAN RESULT IN SERIOUS BODILY INJURY OR DEATH AND/
OR PROPERTY DAMAGE. Refer to this Manual and each of its Parts for further assi󰄋ance
or contact Autec. Autec is not responsible for and shall not be held liable for any in󰄋allation
of the Autec Radio Remote Control not performed by Autec or for any use of the Autec
Radio Remote Control not in complete compliance with, and/or not maintained in complete
compliance with, all Autec in󰄋ructions and warnings and all applicable Laws, Regulations
and Standards, even local.
Autec is not responsible for and shall not be held liable for any alteration or modification
of the Autec Radio Remote Control, or the use of non-Autec components or products
used with or incorporated into the Autec Radio Remote Control.
IT IS THE RESPONSIBILITY OF THE OWNER AND FACILITY OPERATOR, AND THEIR
DESIGN PROFESSIONALS, to be certain that the Autec Radio Remote Control is properly
maintained and serviced at all times in compliance with all Autec in󰄋ructions and
warnings, and with all applicable Laws, Regulations and Standards, even local.
IT IS THE RESPONSIBILITY OF THE OWNER AND FACILITY OPERATOR, AND THEIR
OFFICERS, MANAGERS AND SUPERVISORS, to be certain that all Users of the Autec
Radio Remote Control and that all Persons who are or will be working with or near the
Machine operated by or through the Autec Radio Remote Control are fully and properly
educated and trained by qualified Personnel in the proper and safe use of the Autec Radio
Remote Control and of the Machine, including without limitation complete familiarity
with and under󰄋anding of Autec warnings and in󰄋ructions, and all applicable Laws,
Regulations and Standards, even local, and that such Users and other Persons do in fact
at all times operate or work with the Autec Radio Remote Control safely and ONLY in
compliance with Autec in󰄋ructions and warnings and with all applicable Laws, Regulations
and Standards, even local. FAILURE TO DO SO CAN RESULT IN SERIOUS BODILY INJURY
OR DEATH AND/OR PROPERTY DAMAGE.