Instruction Manual

LIUFJQ001_eng-00 AUTEC
30
8.16.1 Address 󰄋orage
Perform the following procedure with fully charged battery and power keyswitch inserted in the
BACK-UP UNIT:
1. Press the STOP pushbutton.
2. Press the START pushbutton and hold it pressed until the green LED turns o󰘯.
3. Unlock the STOP pushbutton.
It is now possible to 󰘵art the Radio Remote Control and to control the Machine with the BACK-
UP UNIT Transmitting Unit.
9 In󰄋ructions for the User
The chapter "Instructions for the User" in "Part A" of the Instruction Manual contains the
warnings for the use that add to those provided in this chapter. Therefore, please refer to
that part of the Manual.
The following in󰘵ructions are general, they refer to general usage situations for the Transmitting
Unit, and indicate how people should or should not behave when using the unit: these do not
cover any possible risk situation and/or drawback that may depend on specific applications of
Autec Radio Remote Controls.
However, in󰘵ructions given in the following paragraphs do not replace nor complete the
in󰘵ructions that mu󰘵 be provided to the User by the Manufacturer of the Machine where an
Autec Radio Remote Control (to which the FJQ Transmitting Unit belongs) is in󰘵alled.
9.1 Usage re󰄋rictions
If the Radio Remote Control User wears electronic devices (by way of example:
pacemaker, implantable cardiac defibrillator, hearing aids), the Transmitting
Unit mu󰄋 be kept at lea󰄋 15 cm away from those devices when in use.