Datasheet

AUTEC GmbH, Rheinauenstrasse 1, 79415 Bad-Bellingen
Registergericht Freiburg 412360, Geschäftsführer: Beat Ruesch, Michael Heunisch
AUGLAS HTS-AL
Features and Benefits
AUGLAS HTS-AL is a one piece braided E - Glass fibre sleeve laminated to aluminium foil.
The sleeve is virtually seamless and non fraying construction.
Working temperature: 200˚C
Flexible
Low Profile
Excellent protection against radiant heat
Fluid and chemical resistant
Applications
Tubing’s and hoses
A/C lines
Hydraulic and fuel lines
Control cables
Engine wire harness
AUGLAS HTS-AL
Nominal I/D – (MM)
Standard Reel lengths
10
150 metres
13
150 metres
16
100 metres
19
100 metres
22
100 metres
25
100 metres
32
100 metres
38
50 metres
45
50 metres
51
50 metres
Material Data
Material
HTS-AL (One piece E - fibreglass sleeve laminated with
aluminium foil)
Operating Temperature
Range
220˚C Test ( SAE J2302)
Flammability
Flame Resistance – Test FMVSS 302 – Non Flammable
Fluid Resistance
No visible degradation or alteration after being exposed to
the following test
Immersion for 24h at 80˚C : Windshield cleaner and at
120˚C engine coolant
Immersion for 2.5h at 80˚C : (in vapour) followed by a
drying period of 4h at 23˚C ; Battery fluid Immersion for 15s
at 22˚C followed by a drying period of 24h at 150˚C : motor
oil, protection oil, automatic transmission fluid, mineral
hydraulic fluid, zinc chloride ( drying at 23˚C)
AUTEC - DSG-CANUSA - PANDUIT - NITTO
Isolation / Schutz / Befestigung / Kennzeic hnung