User's Manual

AUTEC - Dynamic Series
Operation 29
LIDYNE00-07
6.5 STOP pushbutton
The STOP pushbutton should be pressed when it is necessary to immediately
stop the machine when a dangerous condition occurs.
When the STOP pushbutton is pressed, the machine stops (active
stop: see paragraph 1.6.1), and the transmitting unit switches o󰘯.
To start working again after the STOP pushbutton has been
pressed:
1. make sure that the working and usage conditions are safe
2. turn the STOP pushbutton in the arrow direction to unlock it
3. start up the radio remote control (see paragraph 5.1).
6.6 Command meaning
Commands on the transmitting unit are established according to the machine's operations
and functions. They are established by the machine manufacturer, who also chooses the
symbols used.
Some of the commands available on the transmitting unit are described in the following
paragraphs (symbols provided here are generally used).
6.6.1 RPM+/- switch (during normal operation)
This switch increases (rpm +) or decreases (rpm -) the engine
revolutions of the remote controlled machine.
Symbol Meaning
This symbol indicates the increase of the machine's engine revolutions.
This symbol indicates the decrease of the machine's engine revolutions.