User's Manual

AUTEC - Dynamic Series
Actuators for the display 7
LIFJME00-06
6 Actuators for the display
If the transmitting unit has a display, it can be used through a pushbutton (see paragraph
6.1 ) or six pushbuttons (see paragraph 6.2).
Functions carried out by these actuators are decided by the machine manufacturer: the user
must be properly trained about them.
6.1 DISPLAY pushbutton
This pushbutton is used to:
- activate the display lighting, if it is o󰘯
- cyclically scroll the information on the display in two di󰘯erent
modes:
- manual: the lines scroll up each time the pushbutton is
pressed
- automatic: when the DISPLAY pushbutton is pressed for
3 seconds, the lines scroll automatically. If the DISPLAY
pushbutton is pressed again, it switches back to manual
mode.
It is not possible to scroll the lines if icons only are displayed.
The display lighting stays on for a time set by the machine
manufacturer.
Symbol Meaning
This symbol identi󰘰es the DISPLAY pushbutton.
The DISPLAY pushbutton may perform di󰘯erent functions from that described
above according to what de󰘰ned by the machine manufacturer.