Instruction Manual

LIUFJQ001_eng-00AUTEC

8.7.1 Battery insertion

To insert the battery, proceed as follows:

1. Push the battery towards the contacts of the Transmitting Unit.

2. Insert the battery in its housing.

The battery slides easily into place and ensures that the positive (+) and negative

(-) poles are correctly connected only if it is inserted with the plate facing its housing,

so that the battery's contacts match the Transmitting Unit's contacts.

8.7.2 Battery removal

To remove the battery, proceed as follows:

1. Push the battery towards the contacts of the Transmitting Unit.

2. Remove the battery from its housing.

When the Transmitting Unit is not in use, remove the battery if possible.

8.8 ID internal tx memory

The ID internal tx memory is a key containing the address that is used to code messages

exchanged between the Transmitting Unit and the Receiving Unit.

This key, if present, is inside the Transmitting Unit.

The ID internal tx memory is present in the Transmitting Unit when this has a mechanical key,

and not the Key ID 0-1, as a power keyswitch (see paragraph 8.1).