Instruction Manual
LIUFJQ001_eng-00AUTEC
19
8.3 STOP pushbutton
When the STOP pushbutton is activated, the Machine ops and the
Transmitting Unit switches off. To art the Radio Remote Control again
and enable it to control the Machine after the STOP pushbutton has
been pressed, you need to:
- Make sure that the working and usage conditions are safe.
- Pull or turn the STOP pushbutton in the arrow direction (shown on
the button) to unlock it.
- Start the Radio Remote Control following the procedure described in
paragraph 8.9).
The STOP pushbutton should be pressed when it is necessary to op the
Machine immediately whenever a dangerous condition occurs.
The Machine Manufacturer and/or the Inaller mu provide the User with the
inructions and warnings concerning possible risks that may originate from
the Machine op (by way of example: movement inertia, swinging load…).
8.4 Pushbuttons for display/LED
LED matrix 2.8” display 4.3” display
A
B
C
E
B
D
E
A
C
B
A
D
C
E
A Red LED
B Green LED
C LEDs for Data Feedback function
D Display
E Keys