Instruction Manual

LIUFJQ001_eng-00AUTEC
11
This symbol identifies the parts of text in the Manual containing warnings,
information and/or in󰄋ructions that are particularly relevant with regards to
safety; failure in under󰄋anding them may cause hazards for People and/or
property.
1.4 To whom the in󰄋ructions are addressed
Addressees of instructions are listed in the paragraph with the same title in the general part:
please refer to that part.
1.5 In󰄋ruction 󰄋orage
Regulation for the storage of instructions are described in the paragraph with the same title
in the general part: please refer to that part.
1.6 Intellectual property
Restrictions connected to intellectual property are described in the paragraph with the same
title in the general part: please refer to that part.
2 Brief product presentation
2.1 Series, Radio Remote Control and Unit
The object of this part of the Manual is the FJQ (Model J2F) Transmitting Unit of an Autec
Dynamic series' Radio Remote Control.
Autec Dynamic series' Radio Remote Controls are designed to be used on Machines and provide
a command interface to their command and control sy󰘵em, to be used from an appropriate
di󰘵ance and position.
2.2 Conformity with 󰄋andards
The conformity of Radio Remote Controls with standards and with working requirements and
conditions in the single Countries is provided in the related speci󰘰c part “Conformity and
frequencies” (Part B) of the Manual.
2.3 Contacts and useful addresses
The Radio Remote Controls are produced by Autec Srl – Via Pomaroli, 65 - 36030 Caldogno
(VI) - Italy.
You can find contacts for Autec, its di󰘵ributors, dealers and authorized service centres on the
website www.autecsafety.com.