Instruction Manual
The stop function by means of Radio Remote Control is available only if the Radio
Remote Control is started up (see "Starting up the Radio Remote Control" in the
"Part C" of the Manual).
Never leave the Transmitting Unit unguarded in order to avoid uncertainty
about the availability or unavailability of the stop function.
The “life time”, as dened in international standards and requirements, of
the stop function is 20 years. In any case, the Radio Remote Control must
be replaced within this period. The “life time” must not be considered as
a warranty period.
After the activation of the STOP on the Transmitting Unit, the Machine is not
controlled by the Radio Remote Control any more. Any possible risks that
may arise from the activation of the stop function must be taken into account
by the Installer of the Radio Remote Control, and by the Manufacturer and
the Owner of the Machine where the Radio Remote Control is installed.The
Radio Remote Control User must be properly trained about this.
AUTEC - Dynamic Series
Radio Remote Control features 23
LIUDYN002_eng-01