User's Manual

18
LIUDJR000_eng-00
General operating instructions
AUTEC - Dynamic Plus series
8.2 START pushbutton
The START pushbutton is used to:
- start the Radio Remote Control (see paragraph 8.9),
- activate the horn when the Radio Remote Control is started.
8.3 STOP pushbutton
When the STOP pushbutton is activated, the Machine stops and
the Transmitting Unit switches o󰘯. To start the Radio Remote
Control again and enable it to control the Machine after the STOP
pushbutton has been pressed, you need to:
- make sure that the working and usage conditions are safe,
- turn the STOP pushbutton in the arrow direction to unlock it,
- start the Radio Remote Control following the procedure
described in paragraph 8.9.
The STOP pushbutton should be pressed when it is necessary to stop the
Machine immediately whenever a dangerous condition occurs.
The Machine Manufacturer and/or the Installer must provide the instructions
and warnings concerning possible risks that may originate from the Machine
stop (by way of example: movement inertia, swinging load…).