User's Manual

40
LIUDTH000_eng-00
Instructions for the User
AUTEC - Dynamic Plus series
8.2.2 During normal operation
Pay attention to the entire work area. Immediately press the STOP pushbutton
when a hazardous situation occurs.
Visually and directly follow all movements of the Machine and its load and
remain inside the Radio Remote Control working range.
Pay particular attention to warnings and visual and acoustic signals, and
take all measurements and steps to avoid that movements of the remote
controlled Machine may lead to hazardous situations for people and/or
property.
In case of malfunction, switch o󰓐 the Transmitting Unit and disconnect
power supply from the Receiving Unit: this way, the system "Machine+Radio
Remote Control" is disabled; it cannot be used until the problem has been
solved by implementing the necessary technical operations.
Pay attention to low battery signals: all dangerous operations (by way of
example: hanging load) must be concluded before the battery is completely
󰄉at.
Use the Transmitting Unit with the complements provided with the Radio
Remote Control (by way of example: pouch, waist belt, shoulder harness)
to avoid that it accidentally falls, or that actuators come into contact with
external bodies, or that the Unit is used improperly.
8.2.3 After using the Radio Remote Control
Switch o󰓐 the Transmitting Unit when not using the remote control to control
the Machine, or when work is otherwise interrupted, even for short periods.
Do not leave a load hanging or the Machine in dangerous conditions (even
when charging the Unit or changing the battery).
Never leave the Transmitting Unit unguarded in order to prevent unauthorised
or non supervised use.