User's Manual

AUTEC - Dynamic Plus series
Installing the Receiving Unit 19
LIUCRD000_eng-00
8 Installing the Receiving Unit
The chapter "Installation" in "Part A" of the Instruction Manual contains the warnings for the
installation that add to those provided in this chapter. Therefore, please refer to that part of
the Manual.
8.1 Warnings for the Installer
The Installer must:
- observe and comply with all instructions and warnings provided by the Machine
Manufacturer;
- observe and comply with all instructions and warnings provided by the Person responsible
for the Machine commissioning or making the Machine available for work;
- observe and comply with all instructions and warnings provided in the Radio Remote
Control Manual;
- observe and comply with all applicable Laws, Regulations and Standards, even local.
- operate the Autec Radio Remote Control only in accordance with this Manual and all
of its Parts, and with all Autec warnings and instructions, and with applicable Laws,
Regulations and Standards,even local;
- operate the Machine operated by or through the Autec Radio Remote Control only in
accordance with the Machine Manufacturer’s instructions and warnings, and with applicable
Laws, Regulations and Standards, even local;
- operate the Machine operated by or through the Autec Radio Remote Control only when
they are in a safe condition and can perfectly see the whole Machine's working area;
- immediately inform their supervisors and/or the people in charge for the working place
and/or for the Machine about any possible failure, damage, loosening, anomalous wear,
detachment and/or any other anomaly that may cause malfunction to the Radio Remote
Control and/or to the Machine, or that may cause damage to people and/or property;
- keep the Transmitting Unit secure and out of reach of unauthorized and unquali󰘰ed
Personnel.
ADDITIONAL WARNINGS AND INSTRUCTIONS THAT ARE CONTAINED IN
THE OTHER PARTS OF THIS MANUAL MUST BE FOLLOWED.
8.2 Positioning the antenna
The CRD Receiving Unit may be con󰄈gured with internal antenna or external
antenna (see Technical Data Sheet). If the antenna is external, it cannot be
mounted directly on the Receiving Unit's casing, but it must be installed
with the antenna cable-extension kit.