User's Manual

AUTEC - Dynamic Plus series
Light signals 17
LIUCRD000_eng-00
7.2 POWER LED
The POWER LED indicates the status of the Receiving Unit and of the radio link.
Signal Meaning
The POWER LED is o󰓐. The Receiving Unit is o󰘯.
The POWER LED is on. The Transmitting and Receiving Unit do not communicate.
The POWER LED repeats the
sequence: a blink and a pause.
The Radio Remote Control is started and the Units
communicate via radio link in the 863-870MHz frequency
band.
The POWER LED repeats the
sequence: two blinks and a pause.
The Radio Remote Control is started and the Units
communicate via radio link in the 915-928MHz frequency
band.
The POWER LED repeats the
sequence: three blinks and a
pause.
The Radio Remote Control is started and the Units
communicate via cable control.
7.3 STATUS LED
The STATUS LED warns about anomalies on the outputs or on the power supply and indicates
the reception of data from the Transmitting Unit.
Signal Meaning
The STATUS LED is o󰓐. The Transmitting and Receiving Unit do not communicate.
The STATUS LED blinks slowly. Over-voltage on power supply.
The STATUS LED blinks fast.
The Receiving Unit receives data from the Transmitting
Unit.