User's Manual

16
LIUCRD000_eng-00
Light signals
AUTEC - Dynamic Plus series
7 Light signals
The CRD Receiving Unit has four seven-segment displays and 󰘰ve LEDs called POWER,
STATUS, RUN, ERR and SETUP.
The meaning of light signals is described in the following paragraphs; possible actions to
carry out are given in chapter 10.
7.1 Seven-segment display
The seven-segment displays show the status of the Receiving Unit and of the radio link.
Signal Meaning
The Transmitting and Receiving Unit do not communicate.
a
The radio remote control is started up.
a
Receiving Unit's internal temperature (°C).
a
Receiving Unit's supply voltage (V).
a. These signals alternate when the Radio Remote Control is started.
In addition, the seven-segment displays signal possible errors on the STOP and SAFETY
outputs (see chapter 10).