User's Manual

AUTEC - Dynamic Plus series
Technical Data Sheet 15
LIUCRD000_eng-00
5 Technical Data Sheet
The Radio Remote Control 's Technical Data Sheet:
- describes the Transmitting Unit's con󰘰guration,
- indicates the relation between commands sent by the Transmitting Unit and those available
on the Receiving Unit.
The Technical Data Sheet must be 󰘰lled in, checked and signed by the Installer, who is
responsible for correct wiring.
A Technical Data Sheet must always be kept together with this Manual: if you need to use
the Technical Data Sheet for administrative purposes (tests, check, etc.), make a copy of it.
The wiring of the Receiving Unit's outputs must always re󰄉ect the wiring
indicated in the Technical Data Sheet.
6 Plates
The CRD Receiving Unit has the following plates:
Plate Position Content
Radio Remote Control
identi󰄈cation plate
Receiving Unit's cover
Radio Remote Control serial number
(S/N), bar code and manufacturing year.
Technical data plate Receiving Unit's cover
MODEL, TYPE and main Receiving Unit
technical data, marking and possible
Radio Remote Control marks.