User's Manual

Dynamic Series
Part D: ARS receiving unit
Plates
D - 4
4Plates
The receiving unit has two plates.
5 Light signals
The ARM receiving unit has six
LEDs:
- POWER is green
- ALARM is red
-STATUS is blue
- RUN is green
- ERR is red
- SETUP is yellow.
1. POWER LED (green)
The POWER LED indicates the status of the receiving unit and of the radio link.
Plate Position Content
radio remote control
identification plate
On the casing of the receiving
unit
Radio remote control serial
number, bar code (S/N) and
manufacturing year.
technical data plate
On the casing of the receiving
unit
MODEL, TYPE and main
receiving unit technical data,
marking and possible radio
remote control marks.
The POWER LED ... Meaning
... is off The receiving unit is switched off.
...blinks Radio link has been built.
... is on No radio link.