User's Manual

Technical data sheet
AUTEC Dynamic Series
LIARSE00-01.fm Part D: ARS receiving unit
D - 3
ENG
2 Technical data
Power supply ......................................................................................................... 8-30 V
Antenna ................................................................................................................ dedicated
Rated current of outputs STP_1 and STP_2 ................................................ 7.5 A (30 V )
Rated current of output SAF ......................................................................... 7.5 A (30 V )
Rated current of digital outputs ........................................................................ 2 A (30 V )
Rated current of analogue outputs (PWM) ...................................................... 2 A (30 V )
Rated current of analogue outputs (voltage) .............................................. 10 mA (28 V )
Protection of power supply (fuse F3) ............................................. 7.5 A (32 V , autofuse)
Protection of STP1 (fuse F5) ......................................................... 7.5 A (32 V , autofuse)
Protection of STP2 (fuse F2) ......................................................... 7.5 A (32 V , autofuse)
Protection of SAF (fuse F4) ........................................................... 7.5 A (32 V , autofuse)
Housing material .............................................................. PBT (30% fg) and PA6 (30% fg)
Protection degree ....................................................................................... IP65 (NEMA 4)
Dimensions ............................................................. 194 x 210 x 61 mm (7.7 x 8.3 x 2.4 In)
Weight ........................................................................................................... 850 g (1.9 Lb)
3 Technical data sheet
The technical data sheet contains the wiring diagram showing the connection be-
tween the receiving unit and the machine.
It also contains the transmitting unit configuration and shows the matching be-
tween commands sent and machine functions/movements.
The technical data sheet must be filled in, checked and signed by the installer,
who is responsible for a correct wiring.
The technical data sheet must be kept together with this manual (always keep a
copy of this data sheet for administrative purposes).
The wiring of the receiving unit outputs must always reflect the wiring indi-
cated in the technical data sheet.