User's Manual

5 Light signals
In AJR transmitting units, a green and a red LED are always available, providing information
regarding the radio remote control.
A Red LED
B Green LED
The green LED… Meaning
…is o󰓐. The transmitting unit is switched o󰘯.
... is steady on. The transmitting and receiving unit do not communicate.
… blinks fast.
The transmitting and receiving unit communicate. It is
possible to start the radio remote control by pressing the
START pushbutton.
… blinks slowly (one blink per
second).
It is possible to send commands.
The red LED … Meaning
…is o󰓐. The transmitting unit works correctly.
... is steady on. At start-up, the STOP pushbutton is activated or damaged.
... blinks twice per second.
At least one of the commands that were checked at start-
up (see technical data sheet) is enabled or damaged.
... blinks three times per second. At start-up,the battery is 󰘱at.
... is steady on for 2s. The transmitting unit does not work correctly.
… blinks slowly (one blink per
second).
The battery has a 2h run time.
... blinks fast. The battery has a 10min run time.
For other LED signals, see Data Feedback function (paragraph 6.3).
6
LIAJRE00-00
Light signals
AUTEC - Air series