User's Manual
7.2 Air-KEY
In the transmitting unit, the radio remote control address is stored in the Air-KEY. For this
reason, the radio remote control cannot work without this key.
The Air-KEY can only be used in the transmitting unit of the radio remote
control where it belongs.
As the radio remote control address is stored in the Air-KEY, use it with
utmost care to reduce risks that may result from incorrect handling.
7.2.1 Air-KEY insertion
Perform the following operations to insert the Air-KEY:
1. push the Air-KEY inside the corresponding housing
2. rotate the Air-KEY clockwise.
7.2.2 Air-KEY removal
Perform the following operations to insert the Air-KEY:
3. rotate the Air-KEY anticlockwise
4. pull the Air-KEY to remove it from the corresponding housing.
7.2.3 BACK-UP UNIT
If the main transmitting unit cannot be used because it has been lost or damaged, it can be
replaced with a transmitting unit called "BACK-UP UNIT".
It is identical to the unit that cannot be used anymore; the only dierence is the presence of
the plate “BACK-UP UNIT” on the battery housing.
Insert in the "BACK-UP UNIT" the Air-KEY of the transmitting unit that cannot
be used any longer and perform the address storage procedure.
AUTEC - Air series
Operation 11
LIAJRE00-00