User's Manual

2
LIAIRE11-02
Conformity
AUTEC - Air series
1 Conformity
1.1 Conformity of frequency band 433.050-434.790MHz
Each AIR series' radio remote control working in the frequency band 433.050-434.790MHz
complies with the (R&TTE) Directive 1999/5/EC and its essential requirements.
Each radio remote control is also in conformity with the harmonised standards provided in
the EC Declaration of Conformity.
You can 󰘰nd the EC Declaration of Conformity on the website www.autecsafety.com, in the
product page of the relevant transmitting unit.
1.2 Conformity of frequency band 915-928MHz: FCC and IC
An AIR series' radio remote control working in the frequency band 915-928MHz complies
with the essential requirements of the following regulations:
- FCC (Federal Communication Commission) Part 15
- IC (Industry Canada) RSS-102
Unit FCC ID IC Number
A8 transmitting unit OQA-A08LA0AM 9061A-A08LA0AM
AJM transmitting unit OQA-AJMDA0BM 9061A-AJMDA0BM
AJR transmitting unit OQA-AJRDA0BM 9061A-AJRDA0BM
AJS transmitting unit OQA-AJSDA0BM 9061A-AJSDA0BM
Receiving unit G
ACRS13-G
OQA-RGAGA00M 9061A-RGAGA00M
a b c
Receiving unit G
DCRS13
OQA-RGEBA00M 9061A-RGEBA00M
a b c
Receiving unit L
ACRS13-L
OQA-RLBHA00M 9061A-RLBCA00M
a b c
Receiving unit M
ACRM15
OQA-RMCEA00M 9061A-RMCEA00M
a b c
Receiving unit
HACRP8
OQA-RPDFA00M 9061A-RPDFA00M
a b c
a. Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.