Users Manual

6 Installation
The chapter "Installing the Receiving Unit" in "Part D" of the Instruction Manual contains the
warnings for the installation that add to those provided in this chapter. Therefore, please
refer to that part of the Manual.
6.1 Applications
AnAutecAirseries'RadioRemoteControlcanbeusedforseveralapplications:theMachine's
ManufacturermustestablishiftheRadioRemoteControlissuitableforeachdierent
application, especially with regards to safety. Autec Air series is most frequently used for
hoisting Machines and Machines for the handling of materials, objects, general loads (by
wayofexample:overheadcranes,hoistingcranes)whenpermittedundertheinstructions
contained in this Manual.
The Autec Radio Remote Control may not be installed on Machines where
it is used for applications or functions not permitted under this Manual and
applicable Laws, Regulations and Standards, even local. INSTALLATION OF
AN AUTEC RADIO REMOTE CONTROL ON OTHER MACHINE OR FOR OTHER
FUNCTIONS MAY CAUSE SERIOUS INJURY OR DEATH OR PROPERTY
DAMAGE.
Autec is not and cannot be held responsible if the Radio Remote Control
is used in unsafe or poor safety conditions. Assessment shall be made
by the Machine Manufacturer to establish possible additional protection
measures for the actuators (by way of example: commands requiring two-
hand operation, “dead-man” function) if particular environments, equipment
and working modes could cause accidental bumps to the actuators.
24
LIUAIR003_eng-01
Installation
AUTEC - AIR SERIES