Users Manual

1.3 Symbols
Thissymbolidenti󰘰esthepartsoftext in theManualthatmustbereadwith
special attention.
This symbol identi󰄈es the parts of text in the Manual containing warnings,
information and/or instructions that are particularly relevant with regards
to safety; failure in understanding them may cause hazards for People and/
or property.
1.4 To whom the instructions are addressed
The Instruction Manual for the use and the maintenance of the Radio Remote Control is
addressed to Manufacturers, design engineers, Installers, assemblers, mechanics, electricians,
Users, operators, drivers, workers, people responsible for productive activities, Maintenance
Technicians and to all the people who, in any capacity and for any reason, work with an Autec
Radio Remote Control or with the Machine where it is installed.
TheManualmustbereadcarefully,understoodandappliedinallitspartsby:
- the Owner and/or Person responsible for the Machine and/or for the Autec Radio Remote
Controland/orfortheiroperation;
- theMachineManufacturer,whodecidestoequipitwithaRadioRemoteControl;
- the Radio Remote Control Installer or the Person who assembles it on a Machine, device,
Machinerysystem,etc.,and/orwhohastheresponsibilityforthatoperation;
- thePersonresponsibleforsafetyintheworkplacewheretheRadioRemoteControlisused;
- Users,thatistosay,thosewhoactually,andinanycapacity,arequali󰘰ed/authorised/
appointedfortheuseofaRadioRemoteControl,orwhoworkwithit;
- MaintenanceTechnicians;
- those who, in any capacity, work with the Radio Remote Control and/or with the Machine,
system, device and/or Machinery system where an Autec Radio Remote Control is
installed, or that are controlled by an Autec Radio Remote Control.
The instructions concerning the installation and maintenance of the Radio
Remote Control are addressed to quali󰄈ed Personnel; their implementation
requires quali󰄈ed professional expertise: none of the operation for which
quali󰄈ed Personnel is required can be carried out by Persons or companies
that do not have the required speci󰄈c professional expertise.
12
LIUAIR003_eng-01
Information on the use of instructions
AUTEC - AIR SERIES