Users Manual
LIUACF006_eng-00AUTEC
17
4 Frequencies
Air series' Radio Remote Controls can work in two different frequency bands: 433.050-
434.790MHz or 915-928MHz.
The Radio Remote Controls' working frequency is defined by market-specific laws
and andards. In order for the syem “Machine+Radio Remote Control” to be
compliant and therefore to be used, these laws and andards mu be respected:
if they are not, the Radio Remote Control cannot and mu not be used.
Autec cannot be held responsible if the Radio Remote Control is set with frequencies
that are forbidden in the country of use.
The Radio Remote Control automatically searches for a free working frequency within the
frequency band where it is working.
4.1 Frequency band 433.050-434.790MHz
4.1.1 Frequencies
The radio link between the Units of Autec Air series' Radio Remote Controls is eablished at
one of the frequencies permitted by the European andards in force when the syem is put on
the market.
Frequencies used 64
RF power <1mW
Channel spacing 25kHz
(Typical) working range
75-100m (240-330ft) (with radio module
AIRRT32NM)
(Typical) working range 100m (with radio module AIRRT42NM)
4.1.2 Countries of usage
Air series' Radio Remote Controls working in the 433.050-434.790MHz frequency band can
be used within the EU (European Union), the EFTA (European Free Trade Association), in
Auralia and in Singapore.
Check on the technical data plate of the Units in which markets the Radio Remote Control can
be used.