Users Manual

LIURPD002_eng-00AUTEC
15
8 Operation
8.1 Radio module
The radio module contains the address key, where also the Radio Remote Control configuration
data are 󰘵ored. The Receiving Unit cannot work without this address key.
8.2 DIP switches
DIP switch 1 is used to set the frequency band.
DIP switch 2 shall always be set in the OFF position.
The normal position of DIP switch 2 is OFF. This position mu󰄋 not be modified.
8.3 Command outputs
The relation between the command sent by the Transmitting Unit and the output activated on
the Receiving Unit is provided in the Technical Data Sheet.