Users Manual
LIURPD002_eng-00 AUTEC
14
5 Technical Data Sheet
The Radio Remote Control 's Technical Data Sheet:
- Describes the Transmitting Unit's conguration
- Indicates the relation between commands sent by the Transmitting Unit and those available on
the Receiving Unit.
The Technical Data Sheet mu be filled in, checked and signed by the Inaller, who is responsible
for correct wiring.
A Technical Data Sheet mu always be kept together with this Manual: if you need to use the
Technical Data Sheet for adminirative purposes (tes, check, etc.), make a copy of it.
The wiring of the Receiving Unit's outputs mu always reflect the wiring
indicated in the Technical Data Sheet.
6 Plates
Plate Position Content
Radio Remote Control
identification plate
Receiving Unit's cover
Radio Remote Control serial
number (S/N), bar code and
manufacturing year.
Technical data plate Receiving Unit's cover
MODEL, TYPE and main
Receiving Unit technical data,
marking and possible Radio
Remote Control marks.
7 Light signals
The meaning of light signals illumination is described in the following table; possible actions
to perform are given in chapter 11.
Signals Meaning
The red indicator light is off. The Receiving Unit is off.
The red indicator light blinks once every 5 seconds.
The Receiving and Transmitting Unit do not
communicate.
The red indicator light blinks fa.
The Unit is ready to receive commands sent by the
Transmitting Unit.