User's Manual

The S-KEY can only be used in the transmitting unit of the radio remote
control where it belongs (main transmitting unit).
As the radio remote control address is stored in the S-KEY, use it with utmost
care to reduce risks that may result from incorrect handling.
If the main transmitting unit cannot be used because it has been lost or
damaged, the back-up transmitting unit can be used instead. In this case,
insert the S-KEY in the back-up unit. The backup unit is identical to the
mainunit;theonlydi󰓐erenceisthepresenceoftheplate“BACK-UPUNIT”
on the battery housing.
6.3 START pushbutton
The START pushbutton is used to:
- start up the radio remote control (see paragraphs 5.1, 5.4 and 5.5)
- activate the horn when the radio remote control is started.
6.4 STOP pushbutton
The STOP pushbutton should be pressed when it is necessary to immediately
stop the machine when a dangerous condition occurs.
When the STOP pushbutton is pressed, the machine stops (active stop:
see paragraph 1.6.1), and the transmitting unit switches o󰘯.
To start working again after the STOP pushbutton has been pressed:
1. make sure that the working and usage conditions are safe
2. turn the STOP pushbutton in the arrow direction to unlock it
3. start up the radio remote control (see paragraph 5.1).
AUTEC - Dynamic series
Operation 25
LIDYNE00-03