User's Manual

AUTEC - AIR series
26 Conformity and frequencies
Identifying the radio remote control
tivated when the radio link is incorrect or interrupted (the receiving unit autonomously stops
the radio remote control).
1.4.2 Protection against unintended movements from the standstill position (UMFS)
This safety function protects the system “machine+radio remote control” from unintended
movements, namely machine movements not activated intentionally by the user, but result-
ing from possible electrical and mechanical failure of the radio remote control.
Such safety function checks the neutral (rest) position of pushbuttons controlling the ma-
chine's movements. Each time one of those pushbuttons is operated, the transmitting unit
sends both the movement command and the SAFETY command.
1.5 Identifying the radio remote control
As required by standard IEC 60204-32 , each radio remote control is uniquely identified
through a serial number (S/N).
The S/N is provided in the identification plate in the two units.
2 Conformity and frequencies
2.1 Frequency band 433.040-434.790 MHz
2.1.1 Conformity
Each AIR series' radio remote control working in the frequency band 433.040-434.790 MHz
complies with the (R&TTE) Directive 1999/5/EC and its essential requirements.
Each radio remote control is also in conformity with the harmonised standards provided in
the EC Declaration of Conformity.
You can find the EC Declaration of Conformity in the specific section of Autec website,
under “After Sales Service”.
2.1.2 Frequencies
The radio link between the units of Autec AIR series radio remote controls is built at one of
the frequencies permitted by the European standards in force when the system is put on the
market.
Frequencies used in the frequency band 433.040-434.790 MHz...................................... 64
RF power................................................................................................................... <1 mW
Channel spacing........................................................................................................ 25 kHz
2.1.3 Market
Air series' radio remote controls working in the frequency band 433.040-434.790 MHz can
be used within the EU (European Union) and the EFTA (European Free Trade Association).
@