User Guide

Pi 6 english
Heating in-between seasons
Heating the stove in between seasons, when the
outside temperatures are higher, the flue gases
are not able to escape completely and this may
lead to disturbances in the chimney draught,
especially if the temperatures are rising suddenly.
The stove has to be charged with less wood and
the primary air has to be increased so that the
wood can burn down faster (with visible flames)
and thus the chimney flue can stabilize.
Chimney fire
Chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel are
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have
an expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description Nr. drawing Part number
Flat gasket 8 x 2 mm glas 16 710096
Round gasket 14 mm door 17 714223
Round gasket 8 mm door 18 710049
Keramott
Description Nr. drawing Part number
Bottom Keramott left 1 712933
Bottom Keramott right 2 712931
Bottom Keramott rear 3 712930
Rear Keramott 4 712934
Bottom Keramott front 5 712932
Side Keramott left 6 714390
Side Keramott right 7 714391
Keramott baffle plate 8 712841
Grate 9 716408
Other parts
Description Nr. drawing Part number
Pi door 10 712936-29
Pi glass 11 712920
Pi door handle 12 712919
Pi BA 1 spring 13 714422-15
Wood lighter sachets 100 pcs. per can -- 640162
Stove lacquer -- 650002
Glass cleaner ½ litre -- 640070
Accessories
You can obtain floor plates of glass or steel, fireplace utensils, care products or the Heat Memory System
for heat storage from your certified dealer.
IMPORTANT: Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the stove annually.
order of Keramott installation acc. to numbering!