User Guide

Koko 6 english
Heating in between seasons
Heating the stove in between seasons, when the
outside temperatures are higher, the flue gases
are not able to escape completely and this may
lead to disturbances in the chimney draught,
especially if the temperatures are rising suddenly.
The stove has to be charged with less wood and
the primary air has to be increased so that the
wood can burn down faster (with visible flames)
and thus the chimney flue can stabilize.
Chimney fire
Chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel are
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have
an expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Keramott
Description Nr.drawing Part number
Bottom left, Keramott 1 714383
Bottom right, Keramott 2 714382
Rear, Keramott 3 714384
Side component left, Keramott 4 714386
Side component right, Keramott 5 714385
Baffle plate rear, Keramott 6 714381
Wood retainer, Keramott 7 714380
Grate 8 716408
Other parts
Description Nr.drawing Part number
Koko door 1 714400-29
Door handle 2 712919
Koko BA1 door spring 3 714399-15
Koko door glass 4 714442
Glass cleaner ½ litre -- 640070
Stove lacquer -- 650002
Wood lighter can à 100 pcs. -- 640162
Gaskets
Description Nr.drawing Part number
Flat gasket 8x2, L=1425 mm 5 710096
Door flat gasket 8x2, L=1420 mm 6 710096
Accessories
You can obtain floor plates of glass or steel, fireplace utensils, care products or the Heat Memory System
for heat storage from your certified dealer.
IMPORTANT: Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the stove annually.
Keramott numbering = installation instructions!