Specifications

DEX 18 / 21 / 24 / 27 KW
6
4. Gerätebeschreibung 4. Description of appliance
The instantaneous water heater DEX is
a microprocessor-controlled, pressure-
resistant water heater for a decentralised
water supply to one or more tap connec-
tions.
Its electronic control regulates the power
consumption depending on the selected
outlet temperature, the respective inlet
temperature and the flow rate, thus reach-
ing the set temperature exactly to the
degree and keeping it constant in case of
pressure fluctuations. The required outlet
temperature can be entered on a keypad
within a range between 20°C and 60°C
and can be read off the digital display.
The maximum inlet temperature can be up
to 70°C so that operation in connection
with solar heating systems is possible.
It is possible to use the instantaneous
water heater in combination with an
external load shedding relay for elec-
tronically controlled instantaneous water
heater.
Der Durchlauferhitzer DEX ist ein mikro-
prozessorgesteuerter, druckfester
Durch lauf erhitzer zur dezentralen Warm-
wasser bereitung an einer oder mehreren
Zapfstellen.
Die Elektronik regelt die Leistungsauf-
nahme in Abhängigkeit von der gewähl-
ten Auslauftemperatur, der jeweiligen
Einlauftemperatur und der Durch fluss-
menge, um die eingestellte Temperatur
gradgenau zu erreichen und bei Druck-
schwankungen konstant zu halten. Die
gewünschte Auslauf temperatur kann
durch Tasten druck von 20 °C bis 60 °C
eingegeben und an der digitalen Anzeige
abgelesen werden.
Die Einlauftemperatur kann bis zu 70°C
betragen, so dass auch der Betrieb zur
Nacherwärmung in Solaranlagen möglich
ist.
Der Durchlauferhitzer kann in Kombi-
nation mit einem externen Last abwurf -
relais für elektronische Durch lauf erhitzer
betrieben werden.