SERVICE INFORMATION XRS10P POWERED LOUDSPEAKER CONTENTS: OPERATION MANUAL SCHEMATIC DIAGRAM Australian Monitor 1 Clyde Street, Silverwater NSW 2128 Australia +61 2 9647 1411 www.australianmonitor.com.
XRS SERIES POWERED AND PASSIVE LOUDSPEAKERS INSTALLATION AND OPERATION MANUAL
IMPORTANT SAFETY INFORMATION 1. Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship the unit, use only the original factory packing. 2. Read all documentation before operating your equipment. Retain all documentation for future reference. 3. Follow all instructions printed on unit chassis for proper operation. 4. Do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. 5.
INTRODUCTION AND CONTENTS Building on the reliability and sonic quality of the very popular XR speaker series, Australian Monitor brings you the AM Pro XRS two way injection moulded speaker enclosures with more features and new aesthetic to suit both live sound reinforcement and permanent installation. From Front of House to fold back, the dance floor to background fill, the XRS series with both passive and powered options are designed with flexibility and performance in mind.
FRONT AND REAR PANEL PASSIVE VERSION 1 2 1 High Frequecy Driver 1 XRS8 shown here 1 Speaker Input Horn loaded compression driver. Directivity 90deg x 90deg. Passive crossover in the XRS8/10/12. XRS8/XRS8P 1.5” XRS10/XRS10P 1.5” XRS12/XRS12P 2” The input connector is a 4 pole speakon compatible connector. Pins 1+ and 1- are wired to the +ve and -ve respectively of the speaker. The XRS10 and XRS12 have 2 connectors.
REAR PANEL POWERED VERSION 7 10 2 8 11 4 9 12 6 1 MIC IN This is a balanced XLR microphone input. 10 Line LEVEL This controls the level of the LINE input. (3) 2 Mic SIGNAL 11 Line BASS This is a green LED signal present indicator for the Mic input. It indicates signal present on the input and is not affected by the level control. 1 3 5 3 LINE IN This is a balanced XLR line level input. 4 Line SIGNAL This is a green LED signal present indicator for the Line input.
SPECIFICATIONS XRS8P Drivers XRS10P XRS12P 1 x 8” woofer 1 x 10” woofer 1 x 12” woofer 1 x 1.5” HF driver 1 x 1.5” HF driver 1 x 2” HF driver Frequency Response(-3dB) 65Hz-18kHz 55Hz-18kHz 50Hz-18kHz Frequency Response(-10dB) 55Hz-18kHz 50Hz-18kHz 40Hz-20kHz 118dB 121dB 125dB Bass control @ 100Hz 12dB 12dB 12dB Treble control @ 10kHz 10dB 10dB 10dB 100W(low) + 50W(high) 100W(low) + 50W(high) 300W(low) + 100W(high) Line 0.02% 0.02% 0.02% Microphone 0.04% 0.04% 0.
SPECIFICATIONS XRS8 XRS10 XRS12 1 x 8” woofer 1 x 10” woofer 1 x 12” woofer 1 x 1.5” HF driver 1 x 1.
AUSTRALIA AND NEW ZEALAND www.australianmonitor.com.au SYDNEY MELBOURNE ADELAIDE AUCKLAND (NSW SALES) (VIC & TAS SALES) (SA & NT SALES) (NZ SALES) 1 Clyde Street Silverwater NSW 2128 Private Bag 149 Silverwater NSW 1811 Phone: (02) 9647 1411 Fax: (02) 9648 3698 Email: nsw@audiotelex.com.au 22/277 Middleborough Road Box Hill VIC 3128 PO Box 151 Blackburn South VIC 3130 Phone: (03) 9890 7477 Fax: (03) 9890 7977 Email: vic@audiotelex.com.
1 2 3 4 5 6 7 8 CZ03A D C1 10U/25V-NP CZ01 -15V GND +15V S-IN LIMIT XP3 Q1 R19 2K2 XP3 D3 1N4148 2N5551 C9 1U/50V -15V R16 R15 1M R17 10K IC2A D2 R14 47K IC2B 10K 2 D1 D C12 22U/50V C11 22U/50V 6 1N4148 TL074 TJC3-5A LIMIT IC3E V+ V- IC2E V+ V- IC1C R26 8K213 C16 12 153 IC3D CV2 104 11 11 4 TL074 CV4 104 2 RP1-1 10K CV6 104 2 R14 3 10K R13 1 1 IC2A JRC4560 D2 1N4148 B D8 1N4148 -15V 1N4148 TL074 10K C 6P*100MM(2.
