Specifications

Made in China
Frequency Response (-3dB) 65Hz-18kHz
Sensitivity (dB 1W 1m) 92 dB
Impedance 8 Ohm
Recommended Max Power (Program) 200W
1-
2 Way Full Range Speaker
Built-in Passive 2 Way Crossover
1+ 1- : INPUT
SN:
XRS8B
2+
1+
2-
Made in China
SN:
XRS8 ODV
100V 25W/70V N.C
100V 50W/70V 25W
8 OHM BYPASS
100V N.C/70V 100W
100V 100W/70V 50W
2 Way Full Range Speaker
Weather Proof 100V/70V
Frequency Response (-3dB) 65Hz-18kHz
Sensitivity (dB 1W 1m) 92 dB
Impedance 8 Ohm
Recommended Max Power (Program) 200W
PAGE 5
XRS SERIES INSTALLATION AND OPERATION MANUAL
XRS REAR PANEL – PASSIVE AND CONSTANT VOLTAGE
1
Speaker Input
The input connector is a 4 pole speakon compatible
connector. Pins 1+ and 1- are wired to the +ve and -ve
respectively of the speaker. The XRS10 and XRS12 have 2
connectors. They are wired in parallel so either connector can
be used as an input, the other as a loop through.
1 1 2
XRS8 B shown here XRS8 ODV
1
Voltage Tap Select Switch
The switch on the back of the XRS ODV speakers allows
you to select the desired transformer tap. Each speaker
has 3 taps at 70.7 V and 100 V, there is also a low impedance
transformer bypass option.
2
Fly Lead
The fly lead coming out of the XRS ODV speakers is a 2 core
speaker lead. The internal cores are red and black, red is
positive and black is negative. The fly lead is used for both
constant voltage and low impedance inputs.