Install guide

ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Legend for Figure 3-7
1.
Guide pin
Washer
16.
Screw 17.
Computer cover 18.
CDU Mount bracket 19.
Catch strike 20.
Screw 21.
Solid state memory unit Al 22.
Core memory unit Al 23.
Screw 24.
Wedgelock 25.
Computer subassembly
26.
27.
Screw 28.
Air deflector 29.
Screw 30.
Washer
2.
3.
4.
5.
6.
7.
7.1
8.
9.
10.
11.
12.
13.
14.
15.
Captive screw assembly
Computer power supply
RFI gasket
A/D converter circuit card assembly Al1
I/O discrete circuit card assembly A9
Platform I/O circuit card assembly A8
I/O controller circuit card assembly A7
Data buffer circuit card assembly A6
Control no. 3 circuit card assembly A5
Control no. 2 circuit card assembly A4
Control no. 1 circuit card assembly A3
16-bit data circuit card assembly A2
RFI gasket
Thermostatic switch S1
Washer
Figure 3-8. Typical Circuit Card Assembly Removal
44-902-33
NOTE NOTE
Memory unit and IMU are supplied as a Computer may remain in primary pallet
match set. When a memory unit is re-
for core memory unit replacement.
placed, the matching IMU must be in-
stalled.
(a) Loosen 16 captive screws (2) and washers
(1) securing computer cover (3) to computer
(1) Removal.
subassembly (10); remove computer cover.
3-30 Change 1