Install guide

ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Table 3-2. Tools and Materials Required for Direct Support Maintenance – Continued
NSN
Item Purpose
Or Specification
Hexhead driver, 7/64-inch for
1/4-inch drive
Hexhead driver, 3/16-inch for
1/4-inch drive
Installation tool, insert TD 524L
Insulation sleeving, electrical,
heat shrinkable, polyolefin,
flexible, crosslinked
Key, sockethead, L-type handle
7/64-inch
Key, sockethead, L-type handle,
7/64-inch
Knife, pocket
Lubricating oil, general purpose
0-196
Magnet
Mirror, inspection
Multirneter AN/USM-223
Pliers, slip-joint, 6-inch
Pliers, long-nose, 6-or 6-1/2 inch
Pliers, diagonal-cutting,
4-1/2 inch
Power supply, 28 VDC
MH 28-200rS (Christie)
Primer, thread sealant
Punch, center
Saw, hole, 1.00-inch O.D.
Screwdriver, cross-tip, no. O,
4-inch
Used in conjunction with torque wrench to
torque covers on computer, CDU, and
computer power supply to computer
Used in conjunction with torque wrench to
torque the mounting bolt assemblies to IMU
mounts
Used in the replacement of inserts in subfloor
plate
Used on component leads in power supplies
Used in removal of computer and CDU covers
Used in removal of computer power from
computer
Used in scraping excess adhesive from gaskets
and unit involved
Used to lubricate clamping and strike catches
Used to reset unit malfunction
Used to view obstructed components
Used for testing and troubleshooting
Used in repair of captive screws
Used in removal and replacement of components
and computer power supply guide pins
Used in cutting and trimming of wire
Used for primary power during testing. Minimum
of 100 amps at 28 VDC required
Used to apply prior to applying sealing
compound MIL-S-22473, Grades C and H
Used in the installation of the CDU mounting
bracket in winterization M151 series vehicle
Used for first time installation of
cable W7 in HMMV and CUCV
Used in removal and replacement of the elapsed
time indicator and the CDU front panel
assembly
5120-00-761-2015
5120-00-935-4612
MIL-I-23053/5A
5120-00-889-2162
5120-00-951-6589
5110-00-240-5943
5120-00-5454268
5120-00-596-1098
6625-00-999-7465
5120-00-224-1567
5120-00-247-5177 or
5120-00-293-3481
5110-00-240-6209
6310-00-947-9670
MIL-S-22473
5120-00-293-3512
5120-00-060-2004
Change 3
3-9