Install guide

ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
c. Circle-Setting Knob. To adjust the circle-setting
play exists, tighten the hexagon nuts on the foot
knob, turn the knob until three screws can be
plates and on the extensions of the tripod head,
seen through the three holes in the face of the
The legs, when released from the horizontal
knob, Carefully loosen these screws enough to position, should fall to an angle of about 45
press the knob upward or downward to loosen or degrees and remain there. Cheek the movement
tighten the movement. of the legs and, if necessary, tighten the clamp-
d. Tripod.
There should be no play at the junction
ing screws under the head of the tripod.
of the wood and metal parts of the tripod. If
5-14