Install guide

(b)
(c)
ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Figure 4-27. Contact-Pin Insertion-Tool Loading
Turn knurled screw until index line on nest
(6)
die is aligned with proper cable size on
cable scale.
(7)
Lock nest die by tightening nest die lock
screw.
(4) Insert stripped end of cable into lug barrel.
(8)
(5) Insert cable and terminal assembly into the
open nest die so the terminal barrel is cen-
tered in the die. See figure 4-33.
Close crimping tool handles until stop hits the
other handle.
Open crimping tool handles and remove
crimped terminal. Tug on terminal to make
sure it is firmly crimped.
Replace insulating tubing as required.
4-175