Install guide

ARMY TM 5-6675-308-34
MARINE CORPS TM 08837A-34/2
Table 4-5. Tools and Materials Required for General Support Maintenance – Continued
Item
Purpose
NSN or specification
Extractor, screw no. 5
Extraction tools
MS27495R12
MS27495R16
MS27495R20
MS27495R22
Frame, hand hacksaw, and
blades
Hammer, ball peen, 4-
OZ
Hex head driver, 3/1 6-inch for
1/4-inch drive
Hex head driver, 7/64-inch for
1/4-inch drive
Insertion tools
MS27495A12
MS27495A16
MS27495A20
MS27495A22
Installation tool. insert
TC 524L
Insulation sleeving, electrical
heat shrinkable, polyolefin,
flexible, crosslinked
Key, socket head, L-type
handle. 7/64-inch
Key, socket head, L-type
handle. 7/64-inch
Knife, pocket
Used for removal of inserts in subfloor
plate
Used for connector repair
Used for repair of power cables and
installation of winterization kit
Used for setting rivets
Used in conjunction with the torque
wrench to torque the mounting bolt
assemblies to IMU mounts
Used in conjunction with the torque
wrench to torque computer PS
cover, computer cover, and CDU front
panel assembly
Used for connector repair
Used in replacement of inserts in
subfloor plate
Used on component leads in power
supplies
Part of set 5120-00-610-1888
5120-00-103-9708
5120-00-409-5206
5120-00-177-6966
5120-00-146-6557
5110-00-298-9657
5110-00-2774589
5120-00-243-2985
5120-00-935-4612
5120-00-761-2015
5120-00-018-0531
5120-00-018-0529
5120-00-171-6967
5120-00-137-9140
MIL-I-23053/5A
Used in removal and replacement of 5120-00-889-2162
components in power supplies, CDU,
and removal of memory module
Used in removal of the computer power
5120-00-9516589
supply from computer
Used in gasket removal and clean-up 5110-00-240-5943
4-41